• 传感器位于后部位置以及抓持区域占用空间更小的新理念。
• 可选磁性传感器 (1)。
• 只有在抓持物品时，传感器才打开。
• 带有弹簧开口的单动式驱动器。
• 高抓持力。
• 配有几个安装附件 (2)。
• 钢质颚式钳。
• FDA-H1 食品级润滑脂。
• 防止进入微小异物 (3)。
• 重型末端行程。
2-jaw self-centering angular pneumatic sprue
gripper, series DD
• New concept with retracted sensor and smaller dimensi0ns in
the grip area.
• Optional magnetic sensors (1).
• The sensor is ON only when something is gripped.
• Single acting with spring opening.
• Very high closing force.
• Several mounting accessories (2).
• Steel jaws.
• FDA-H1 food-grade grease.
• Protection against the entry of small foreign bodies (3).
• Heavy-duty end-strokes.
带端子板的传感器盒
IP66聚苯i乙烯传感器盒。• 可定制的电缆进线和出线，配有标准电缆密封套。• 2个螺钉端子，可直接连接15个输入/输出 。• 随附铝挤压型材直接固定螺钉。• 每个连接线路的zui大开关电流达1A。
IP66 polystyrene sensor box.• Customizable cable input and output with standard cable gland
2 screw terminals with direct connection of 15 inputs/outputs. • Supplied complete with direct fxing screws for aluminum extruded profles.
Maximum switching current up to 1A for each connection line.
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
双钳口自动校准平行i气动钳夹(SZ系列)
•双作用。
•弹簧关闭；如需要时弹簧打开 。
•多种的紧固和输送选项。
•可选的磁传感器。
•FDA-H1 食品级润滑脂。
•不锈钢颚式钳。
•Double acting.
•Available with normally closed or normally open spring on
request.
•Various options for fastening and feeding.
•Optional magnetic sensors.
•FDA-H1 food-grade grease.
•Stainless steel jaws.
以上信息由专业从事膨胀抓持器的吉玛泰克于2024/6/30 12:34:01发布
转载请注明来源：http://anqing.mf1288.com/jmtkzdh-2778472689.html
